aiche-journal

AIChE Journal (aiche-journal)

Journal positioning

AIChE Journal is the flagship archival journal of the American Institute of Chemical Engineers, publishing fundamental, generalizable chemical-engineering science: transport phenomena, thermodynamics, reaction engineering and kinetics, separations, interfacial and colloidal phenomena, and process systems engineering. Its center of gravity is the principle, not the product — a paper earns space when it advances the understanding of a chemical-engineering phenomenon in a way that transfers beyond the specific system studied. Application case studies that optimize one process, or materials papers where the chemical-engineering science is incidental, are a weak fit and read better at a more applied venue. This skill is a fit / venue-selection / re-framing tool. It does not replace the journal's current official author guidelines. Before submitting, re-check the live AIChE Journal author guidelines on the Wiley site.

When to trigger

• The author names AIChE Journal for a transport, thermodynamics, reaction-engineering, separations, or process-systems manuscript and wants a fit/framing check.
• A paper must be re-framed from "we built/optimized this process" into a generalizable chemical-engineering principle with predictive reach.
• The author is choosing between AIChE Journal's fundamentals bar and the more applied chemical-engineering-journal.
• The author needs AIChE Journal's modeling-and-experiment rigor bar and desk-reject heuristics.

Scope & topic fit

• Transport phenomena: momentum/heat/mass transfer, multiphase flow, mixing, and interfacial transport with new theory, correlation, or mechanism.
• Thermodynamics and molecular engineering: equations of state, phase equilibria, electrolyte and complex-fluid thermodynamics, and predictive property modeling.
• Reaction engineering and kinetics: reactor design and analysis, catalytic kinetics, multiscale reaction–transport coupling, and intensified reactors.
• Separations: distillation, absorption, extraction, adsorption, and membrane separations where the advance is in mechanism, modeling, or generalizable design.
• Interfacial, colloidal, and particle science; population-balance and complex-fluid behavior tied to chemical-engineering phenomena.
• Process systems engineering: modeling, optimization, control, and design at the systems level when the methodological contribution generalizes.

Method & evidence bar

• The central claim is a fundamental, transferable result — a model, mechanism, or scaling — validated against experiment or rigorous simulation, not a tuned outcome for a single feedstock or unit.
• Models must be physically grounded, with stated assumptions, dimensional consistency, and validation against independent data; a fitted correlation with no mechanistic basis is usually insufficient.
• Experimental work must report conditions, uncertainties, and reproducibility in enough detail to reproduce the measurement and the regime of validity.
• Generality is demonstrated, not asserted: show that the result holds across a parameter range, dimensionless regime, or system class — not at one operating point.
• Compare to the correct prior models/correlations and state precisely what is new (wider regime, fewer assumptions, better predictive accuracy).

Structure & house style

• Standard research-article structure (introduction, theory/methods, results, discussion); AIChE Journal publishes full archival articles and shorter formats — re-check current article types on the live guide.
• The introduction frames the chemical-engineering-science gap and the phenomenon being explained, not the application target; the discussion makes the generality/validity argument explicit.
• Equations and dimensionless groups are load-bearing; define all symbols, give a nomenclature section per house style, and keep notation consistent.
• Figures pair model predictions with experimental/simulation data and show error bars and regimes of validity; supporting information carries extended derivations and full datasets.

Official-submission checklist

• Before giving submission-ready advice, read ../../resources/source-basis.md and ../../resources/official-source-map.md; start from the Wiley anchors, then cite the current AIChE Journal author-guidelines page you checked.
• Search the live site for "AIChE Journal author guidelines" and follow the current Wiley/submission-system version.
• Re-check article types, length/figure expectations, and the nomenclature/SI-units formatting conventions.
• Confirm data-availability, supporting-information, and any code/model-sharing expectations.
• Re-check ORCID, competing-interests, funding, author-contribution (CRediT), and AI-use disclosure requirements.
• If the live official instructions conflict with this skill, the official instructions win.

Pre-submission self-check

• The contribution is a fundamental, generalizable chemical-engineering result — not a one-process optimization.
• Models are physically grounded with stated assumptions and validated against independent data.
• Generality is demonstrated across a parameter range / dimensionless regime, not at one operating point.
• Experimental conditions, uncertainties, and reproducibility are fully reported.
• Novelty is pinned to specific prior models/correlations (wider regime / fewer assumptions / better accuracy).
• Nomenclature, units, and notation follow house style and are internally consistent.

Common desk-reject triggers

• Single-process optimization or case study with no transferable chemical-engineering principle.
• Empirical correlation fitted to one dataset with no mechanistic basis or validation regime.
• Materials-synthesis paper where the chemical-engineering science is incidental to the material.
• Simulation-only study with no experimental anchor or testable prediction.
• Application-domain framing (a specific product/plant) where the science does not generalize.
• Scope mismatch: a pure chemistry, pure materials, or pure controls paper using CE only as a label.

Re-routing decision

• Applied/materials-heavy chemical engineering with environmental/energy emphasis → chemical-engineering-journal.
• Membrane materials and transport as the core → journal-of-membrane-science.
• Systems-level energy conversion / techno-economic scope → applied-energy.
• Combustion or energy review synthesis → progress-in-energy-and-combustion-science.
• Catalysis as a chemistry/mechanism advance over CE design → nature-catalysis.

Output format

[Fit] High / Medium / Low (one-line reason)
[Target] AIChE Journal
[Topic tags] <2–3 closest CE subtopics>
[Fundamental claim] <the generalizable transport/thermo/reaction/separation principle in one line>
[Method/evidence] <does model + experiment clear the fundamentals + validation bar?>
[Generality] <range/regime over which the result is shown to hold>
[Top risk] <the single most likely reason for rejection>
[Official items to re-check] <article type / nomenclature / data policy / disclosures>
[Re-route suggestion] <if not a fit, a better-matched venue>