OpenParable
Skip to content
← Back to skills

Nanoimprint Process Controller

Others
nanoimprint-process-controller

Nanoimprint Process Controller is an Agent Skill for general use published in the a5c-ai/babysitter repository on GitHub: a SKILL.md instruction file an AI agent can load to do this task.

Nanoimprint Lithography skill for high-throughput nanopatterning with template management and demolding optimization

View on GitHub ↗
QUICK START

How to use this skill

Bring this guide into your coding agent with a prompt tailored to the tool you use.

  1. Open your project in Codex.
  2. Copy and paste the prompt below.
  3. Review files and risks before approving any action.
Prompt to paste
Inspect the Agent Skill at https://github.com/a5c-ai/babysitter/blob/HEAD/library/specializations/domains/science/nanotechnology/skills/nanoimprint-process-controller/SKILL.md and all supporting files. Report provenance, permissions, scripts, dependencies, and security risks. Propose an exact installation into .agents/skills/nanoimprint-process-controller, but wait for my approval before writing files or running scripts.

Copying this prompt does not install or run the skill. Review third-party files before use.

Nanoimprint Process Controller

Purpose

The Nanoimprint Process Controller skill provides comprehensive nanoimprint lithography process control, enabling high-throughput nanopatterning through template design, imprint optimization, and defect management.

Capabilities

  • Template design and fabrication
  • Imprint pressure and temperature optimization
  • UV-NIL and thermal NIL protocols
  • Demolding force analysis
  • Residual layer control
  • Defect inspection and yield analysis

Usage Guidelines

NIL Process Control

  1. Template Preparation

    • Design with demolding in mind
    • Apply anti-sticking treatment
    • Verify pattern fidelity
  2. Imprint Optimization

    • Optimize pressure and temperature
    • Control residual layer thickness
    • Minimize defects
  3. Yield Improvement

    • Track defect types
    • Optimize demolding conditions
    • Implement cleaning protocols

Process Integration

  • Nanolithography Process Development
  • Directed Self-Assembly Process Development

Input Schema

{
  "template_id": "string",
  "resist_type": "thermal|uv_curable",
  "target_features": {
    "min_cd": "number (nm)",
    "pitch": "number (nm)",
    "aspect_ratio": "number"
  },
  "substrate": "string"
}

Output Schema

{
  "process_parameters": {
    "temperature": "number (C)",
    "pressure": "number (bar)",
    "time": "number (s)",
    "uv_dose": "number (mJ/cm2)"
  },
  "residual_layer": "number (nm)",
  "demolding_force": "number (N)",
  "defect_density": "number (defects/cm2)",
  "yield": "number (%)"
}