Membrane System Designer
Othersmembrane-system-designerMembrane System Designer is an Agent Skill for general use published in the a5c-ai/babysitter repository on GitHub: a SKILL.md instruction file an AI agent can load to do this task.
Membrane separation system design skill for RO, UF, NF, and gas separation applications
QUICK START
How to use this skill
Bring this guide into your coding agent with a prompt tailored to the tool you use.
- Open your project in Codex.
- Copy and paste the prompt below.
- Review files and risks before approving any action.
Prompt to paste
Inspect the Agent Skill at https://github.com/a5c-ai/babysitter/blob/HEAD/library/specializations/domains/science/chemical-engineering/skills/membrane-system-designer/SKILL.md and all supporting files. Report provenance, permissions, scripts, dependencies, and security risks. Propose an exact installation into .agents/skills/membrane-system-designer, but wait for my approval before writing files or running scripts.
Copying this prompt does not install or run the skill. Review third-party files before use.
Membrane System Designer Skill
Purpose
The Membrane System Designer Skill designs membrane separation systems including reverse osmosis, ultrafiltration, nanofiltration, and gas separation applications.
Capabilities
- Membrane selection and sizing
- Module configuration design
- Permeate flux calculations
- Fouling prediction and mitigation
- Cleaning protocol design
- Multi-stage system design
- Recovery and rejection optimization
- Energy consumption analysis
Usage Guidelines
When to Use
- Designing membrane separation systems
- Optimizing existing installations
- Evaluating membrane alternatives
- Troubleshooting fouling issues
Prerequisites
- Feed characterization complete
- Separation requirements defined
- Operating conditions specified
- Fouling potential assessed
Best Practices
- Account for fouling in design
- Plan for membrane replacement
- Include adequate pretreatment
- Consider energy recovery
Process Integration
This skill integrates with:
- Membrane Separation System Design
- Separation Sequence Synthesis
- Process Flow Diagram Development
Configuration
membrane-system-designer:
membrane-types:
- reverse-osmosis
- nanofiltration
- ultrafiltration
- microfiltration
- gas-separation
configurations:
- single-stage
- multi-stage
- recycle
Output Artifacts
- System specifications
- Module datasheets
- Performance predictions
- Cleaning protocols
- Operating procedures