OpenParable
Skip to content
← Back to skills

Corrosion Materials Selector

Others
corrosion-materials-selector

Corrosion Materials Selector is an Agent Skill for general use published in the a5c-ai/babysitter repository on GitHub: a SKILL.md instruction file an AI agent can load to do this task.

Materials selection skill for corrosion resistance based on process conditions and industry standards

View on GitHub ↗
QUICK START

How to use this skill

Bring this guide into your coding agent with a prompt tailored to the tool you use.

  1. Open your project in Codex.
  2. Copy and paste the prompt below.
  3. Review files and risks before approving any action.
Prompt to paste
Inspect the Agent Skill at https://github.com/a5c-ai/babysitter/blob/HEAD/library/specializations/domains/science/chemical-engineering/skills/corrosion-materials-selector/SKILL.md and all supporting files. Report provenance, permissions, scripts, dependencies, and security risks. Propose an exact installation into .agents/skills/corrosion-materials-selector, but wait for my approval before writing files or running scripts.

Copying this prompt does not install or run the skill. Review third-party files before use.

Corrosion Materials Selector Skill

Purpose

The Corrosion Materials Selector Skill recommends materials of construction based on process conditions, corrosion mechanisms, and industry standards to ensure equipment reliability.

Capabilities

  • Corrosion mechanism identification
  • Material screening
  • Corrosion rate estimation
  • Corrosion allowance calculation
  • Material specification development
  • Isocorrosion curve analysis
  • Galvanic compatibility assessment
  • Stress corrosion cracking evaluation
  • Cost-benefit analysis

Usage Guidelines

When to Use

  • Selecting materials for new equipment
  • Evaluating corrosion failures
  • Assessing process changes
  • Specifying replacement materials

Prerequisites

  • Process conditions defined
  • Chemical composition known
  • Operating temperature/pressure specified
  • Design life established

Best Practices

  • Consider all corrosion mechanisms
  • Use conservative assumptions
  • Reference industry standards
  • Validate with experience data

Process Integration

This skill integrates with:

  • Equipment Sizing and Specification
  • Process Flow Diagram Development
  • HAZOP Study Facilitation

Configuration

corrosion-materials-selector:
  standards:
    - NACE
    - API
    - ASME
  material-classes:
    - carbon-steel
    - stainless-steel
    - nickel-alloys
    - non-metallics

Output Artifacts

  • Material recommendations
  • Corrosion assessments
  • Material specifications
  • Cost comparisons
  • Design life estimates