SA-8(24)_secure-failure-and-recovery

SA-8(24) Secure Failure and Recovery

Enhancement of: SA-8

High-Level Description

Family: System and Services Acquisition (SA) Framework: NIST SP 800-53 Rev 5

The principle of secure failure and recovery states that neither a failure in a system function or mechanism nor any recovery action in response to failure leads to a violation of security policy. The principle of secure failure and recovery parallels the principle of continuous protection to ensure that a system is capable of detecting (within limits) actual and impending failure at any stage of its operation (i.e., initialization, normal operation, shutdown, and maintenance) and to take appropriate steps to ensure that security policies are not violated. In addition, when specified, the system is capable of recovering from impending or actual failure to resume normal, degraded, or alternative secure operations while ensuring that a secure state is maintained such that security policies are not violated.

Failure is a condition in which the behavior of a component deviates from its specified or expected behavior for an explicitly documented input. Once a failed security function is detected, the system may reconfigure itself to circumvent the failed component while maintaining security and provide all or part of the functionality of the original system, or it may completely shut itself down to prevent any further violation of security policies. For this to occur, the reconfiguration functions of the system are designed to ensure continuous enforcement of security policy during the various phases of reconfiguration.

Another technique that can be used to recover from failures is to perform a rollback to a secure state (which may be the initial state) and then either shutdown or replace the service or component that failed such that secure operations may resume. Failure of a component may or may not be detectable to the components using it. The principle of secure failure indicates that components fail in a state that denies rather than grants access. For example, a nominally "atomic" operation interrupted before completion does not violate security policy and is designed to handle interruption events by employing higher-level atomicity and rollback mechanisms (e.g., transactions). If a service is being used, its atomicity properties are well-documented and characterized so that the component availing itself of that service can detect and handle interruption events appropriately. For example, a system is designed to gracefully respond to disconnection and support resynchronization and data consistency after disconnection.

Failure protection strategies that employ replication of policy enforcement mechanisms, sometimes called defense in depth, can allow the system to continue in a secure state even when one mechanism has failed to protect the system. If the mechanisms are similar, however, the additional protection may be illusory, as the adversary can simply attack in series. Similarly, in a networked system, breaking the security on one system or service may enable an attacker to do the same on other similar replicated systems and services. By employing multiple protection mechanisms whose features are significantly different, the possibility of attack replication or repetition can be reduced. Analyses are conducted to weigh the costs and benefits of such redundancy techniques against increased resource usage and adverse effects on the overall system performance. Additional analyses are conducted as the complexity of these mechanisms increases, as could be the case for dynamic behaviors. Increased complexity generally reduces trustworthiness. When a resource cannot be continuously protected, it is critical to detect and repair any security breaches before the resource is once again used in a secure context.

What to Check

• Verify SA-8(24) Secure Failure and Recovery is documented in SSP
• Confirm control is operating effectively
• Review evidence of continuous monitoring for SA-8(24)
• Verify enhancement builds upon base control SA-8

How to Test

Step 1: Review Documentation

Examine the System Security Plan (SSP) and related artifacts for SA-8(24) implementation details. Verify the organization has documented how this control is satisfied.

Step 2: Validate Implementation

# For cloud environments, use cloud-audit-mcp tools
# For on-premises, review system configurations directly

# Example: Check if account management policies exist
grep -r "account.management\|access.control" /etc/security/ 2>/dev/null

Step 3: Test Operating Effectiveness

Verify the control is actively functioning, not just documented. Check logs, configurations, and operational evidence.

Tools

Remediation Guide

Control Statement

Implement the security design principle of secure failure and recovery in [organization-defined].

Implementation Guidance

The principle of secure failure and recovery states that neither a failure in a system function or mechanism nor any recovery action in response to failure leads to a violation of security policy. The principle of secure failure and recovery parallels the principle of continuous protection to ensure that a system is capable of detecting (within limits) actual and impending failure at any stage of its operation (i.e., initialization, normal operation, shutdown, and maintenance) and to take appropriate steps to ensure that security policies are not violated. In addition, when specified, the system is capable of recovering from impending or actual failure to resume normal, degraded, or alternative secure operations while ensuring that a secure state is maintained such that security policies are not violated.

Failure is a condition in which the behavior of a component deviates from its specified or expected behavior for an explicitly documented input. Once a failed security function is detected, the system may reconfigure itself to circumvent the failed component while maintaining security and provide all or part of the functionality of the original system, or it may completely shut itself down to prevent any further violation of security policies. For this to occur, the reconfiguration functions of the system are designed to ensure continuous enforcement of security policy during the various phases of reconfiguration.

Another technique that can be used to recover from failures is to perform a rollback to a secure state (which may be the initial state) and then either shutdown or replace the service or component that failed such that secure operations may resume. Failure of a component may or may not be detectable to the components using it. The principle of secure failure indicates that components fail in a state that denies rather than grants access. For example, a nominally "atomic" operation interrupted before completion does not violate security policy and is designed to handle interruption events by employing higher-level atomicity and rollback mechanisms (e.g., transactions). If a service is being used, its atomicity properties are well-documented and characterized so that the component availing itself of that service can detect and handle interruption events appropriately. For example, a system is designed to gracefully respond to disconnection and support resynchronization and data consistency after disconnection.

Failure protection strategies that employ replication of policy enforcement mechanisms, sometimes called defense in depth, can allow the system to continue in a secure state even when one mechanism has failed to protect the system. If the mechanisms are similar, however, the additional protection may be illusory, as the adversary can simply attack in series. Similarly, in a networked system, breaking the security on one system or service may enable an attacker to do the same on other similar replicated systems and services. By employing multiple protection mechanisms whose features are significantly different, the possibility of attack replication or repetition can be reduced. Analyses are conducted to weigh the costs and benefits of such redundancy techniques against increased resource usage and adverse effects on the overall system performance. Additional analyses are conducted as the complexity of these mechanisms increases, as could be the case for dynamic behaviors. Increased complexity generally reduces trustworthiness. When a resource cannot be continuously protected, it is critical to detect and repair any security breaches before the resource is once again used in a secure context.

Risk Assessment

CWE Categories

References

• NIST SP 800-53 Rev 5 - SA-8(24)
• NIST SP 800-53A Rev 5 (Assessment Procedures)
• NIST SP 800-53 Rev 5 Full Catalog

Checklist

• Control documented in SSP
• Implementation evidence collected
• Operating effectiveness validated
• Continuous monitoring in place
• Related controls (CP-10, CP-12, SC-7, SC-8, SC-24) reviewed