Kueue Lineage

Use this when a user wants to trace lineage across any tier: workload → pods, pod → workload, job → workload, etc. The user may provide a resource at any level (Workload, Job, Pod, JobSet, etc.) — always produce the full tree from Workload down to Pods.

Context

Every kueue Workload stores its parent job's identity in ownerReferences. The kueue.x-k8s.io/job-uid label on the Workload holds the UID of that parent, which enables upward traversal from any resource tier.

Each job type sets specific labels on its pods, derived from PodLabelSelector() in each controller.

Steps

Step 0: Find the Workload (skip if user already provided a workload name)

Walk up the ownerReferences chain from the given resource, checking at each level whether a Workload with a matching kueue.x-k8s.io/job-uid label exists. Stop as soon as one is found.

# 1. Get the UID of the resource you were given
UID=$(kubectl get <kind> <name> -n <ns> -o jsonpath='{.metadata.uid}')

# 2. Check if a Workload owns this resource directly
kubectl get kueueworkloads -n <ns> -l kueue.x-k8s.io/job-uid=$UID

# 3. If not found, follow ownerReferences one level up and repeat:
OWNER_KIND=$(kubectl get <kind> <name> -n <ns> \
  -o jsonpath='{.metadata.ownerReferences[0].kind}')
OWNER_NAME=$(kubectl get <kind> <name> -n <ns> \
  -o jsonpath='{.metadata.ownerReferences[0].name}')
# → repeat step 0 with OWNER_KIND / OWNER_NAME

Special cases:

• Pod group pod (pod has kueue.x-k8s.io/pod-group-name label, no ownerRefs): The Workload name equals the group name — no UID lookup needed:

  GROUP=$(kubectl get pod <name> -n <ns> \
    -o jsonpath='{.metadata.labels.kueue\.x-k8s\.io/pod-group-name}')
  kubectl get kueueworkload $GROUP -n <ns>
  

• Deployment pod (pod has kueue.x-k8s.io/managed=true, no pod-group-name): Kueue creates one Workload per pod; the pod's UID is the direct match:

  UID=$(kubectl get pod <name> -n <ns> -o jsonpath='{.metadata.uid}')
  kubectl get kueueworkloads -n <ns> -l kueue.x-k8s.io/job-uid=$UID
  

• StatefulSet pod: pod ownerRef points directly to the StatefulSet (no ReplicaSet). Walk Pod → StatefulSet, then look up by StatefulSet UID.

Once a Workload is found, proceed to Step 1.

---

Step 1: Get the workload's parent job

kubectl get kueueworkload <name> -n <namespace> \
  -o jsonpath='apiVersion={.metadata.ownerReferences[0].apiVersion} kind={.metadata.ownerReferences[0].kind} name={.metadata.ownerReferences[0].name} ns={.metadata.namespace}'

---

Step 2: Fetch intermediate resources and pods by job type

Use the kind from ownerReferences to pick the right path:

batch/Job

No intermediate resources.

kubectl get pods -n <ns> -l batch.kubernetes.io/job-name=<name>

JobSet (jobset.x-k8s.io)

# Intermediate: child Jobs
kubectl get jobs -n <ns> -l jobset.sigs.k8s.io/jobset-name=<name>
# Pods (label propagates through Jobs to Pods)
kubectl get pods -n <ns> -l jobset.sigs.k8s.io/jobset-name=<name>

Useful additional labels on jobs/pods: jobset.sigs.k8s.io/replicatedjob-name, jobset.sigs.k8s.io/job-index.

TrainJob (trainer.kubeflow.org)

TrainJob creates a JobSet internally; pods carry the JobSet label with the TrainJob name:

kubectl get pods -n <ns> -l jobset.sigs.k8s.io/jobset-name=<name>

RayJob (ray.io)

RayJob creates a RayCluster dynamically. Get the cluster name from status first:

CLUSTER=$(kubectl get rayjob <name> -n <ns> -o jsonpath='{.status.rayClusterName}')
kubectl get pods -n <ns> -l ray.io/cluster=$CLUSTER

RayCluster (ray.io)

kubectl get pods -n <ns> -l ray.io/cluster=<name>

RayService (ray.io)

The cluster name is in activeServiceStatus once healthy, but falls back to pendingServiceStatus during startup or upgrade:

CLUSTER=$(kubectl get rayservice <name> -n <ns> \
  -o jsonpath='{.status.activeServiceStatus.rayClusterName}')
# If empty (service still initializing or upgrading), use pendingServiceStatus
CLUSTER=${CLUSTER:-$(kubectl get rayservice <name> -n <ns> \
  -o jsonpath='{.status.pendingServiceStatus.rayClusterName}')}
kubectl get pods -n <ns> -l ray.io/cluster=$CLUSTER

LeaderWorkerSet (leaderworkerset.sigs.k8s.io)

kubectl get pods -n <ns> -l leaderworkerset.sigs.k8s.io/name=<name>

Additional pod labels: leaderworkerset.sigs.k8s.io/group-index, leaderworkerset.sigs.k8s.io/worker-index.

PyTorchJob (kubeflow.org)

kubectl get pods -n <ns> -l training.kubeflow.org/job-name=<name>,training.kubeflow.org/operator-name=pytorchjob-controller

TFJob (kubeflow.org)

kubectl get pods -n <ns> -l training.kubeflow.org/job-name=<name>,training.kubeflow.org/operator-name=tfjob-controller

MPIJob (kubeflow.org)

kubectl get pods -n <ns> -l training.kubeflow.org/job-name=<name>,training.kubeflow.org/operator-name=mpi-operator

PaddleJob (kubeflow.org)

kubectl get pods -n <ns> -l training.kubeflow.org/job-name=<name>,training.kubeflow.org/operator-name=paddlejob-controller

JAXJob (kubeflow.org)

kubectl get pods -n <ns> -l training.kubeflow.org/job-name=<name>,training.kubeflow.org/operator-name=jaxjob-controller

XGBoostJob (kubeflow.org)

kubectl get pods -n <ns> -l training.kubeflow.org/job-name=<name>,training.kubeflow.org/operator-name=xgboostjob-controller

SparkApplication (sparkoperator.k8s.io)

kubectl get pods -n <ns> -l sparkoperator.k8s.io/app-name=<name>

AppWrapper (workload.codeflare.dev)

kubectl get pods -n <ns> -l workload.codeflare.dev/appwrapper=<name>

Pod group (plain pods managed by kueue)

For pod groups, ownerReferences[0] points to the lead pod (kind=Pod), not a group object. Get the group name from that pod's label, then list all group members:

# ownerRef kind=Pod → pod group; get group name from the lead pod's label
GROUP=$(kubectl get pod <lead-pod-name> -n <ns> \
  -o jsonpath='{.metadata.labels.kueue\.x-k8s\.io/pod-group-name}')
kubectl get pods -n <ns> -l kueue.x-k8s.io/pod-group-name=$GROUP

Deployment / StatefulSet (apps)

Kueue creates one workload per pod (not per Deployment/StatefulSet). The ownerReference on each workload points to an individual Pod. Distinguish from pod groups by the absence of kueue.x-k8s.io/pod-group-name on the pod.

Trace the ownerReference chain up to the Deployment/StatefulSet, then use its selector to find all pods:

# ownerRef kind=Pod, no pod-group-name label → Deployment or StatefulSet
# Trace: Pod → ReplicaSet → Deployment (or Pod → StatefulSet directly)
RS=$(kubectl get pod <pod-name> -n <ns> \
  -o jsonpath='{.metadata.ownerReferences[0].name}')
DEPLOY=$(kubectl get replicaset $RS -n <ns> \
  -o jsonpath='{.metadata.ownerReferences[0].name}')
# Get selector and find all pods
SELECTOR=$(kubectl get deployment $DEPLOY -n <ns> \
  -o jsonpath='{.spec.selector.matchLabels}')
# e.g. if selector is {"app":"foo"}, run:
kubectl get pods -n <ns> -l app=<value>

# For StatefulSet, ownerRef on Pod points directly to the StatefulSet (no ReplicaSet):
DEPLOY=$(kubectl get pod <pod-name> -n <ns> \
  -o jsonpath='{.metadata.ownerReferences[0].name}')
SELECTOR=$(kubectl get statefulset $DEPLOY -n <ns> \
  -o jsonpath='{.spec.selector.matchLabels}')

---

Step 3: Display the lineage tree

Format output as a tree from Workload down to Pods. If the user started from a pod or intermediate resource, annotate that entry with ← you are here.

Workload:  <namespace>/<workload-name>
└── JobSet: <namespace>/<jobset-name>
    ├── Jobs (3):
    │   ├── <job-name-0>
    │   ├── <job-name-1>           ← you are here  (if user gave a job name)
    │   └── <job-name-2>
    └── Pods (3):
        ├── <pod-name-0> — <node> [Running]
        ├── <pod-name-1> — <node> [Running]  ← you are here  (if user gave a pod name)
        └── <pod-name-2> — <node> [Running]