discuss

/discuss — Design Discussion Workflow

Facilitate a design discussion about: $ARGUMENTS

Purpose: Understand a design problem, research existing governance context, and produce draft RFC or ADR artifacts. This workflow is for the spec phase — no implementation, no work items.

Outputs: Draft RFC and/or proposed ADR, then handoff to /spec or /gov as appropriate.

Artifact roles: RFCs define obligations, ADRs explain decisions, and work items track execution. Keep those authority boundaries intact while drafting.

---

QUICK REFERENCE

# Context discovery
govctl status                             # Project overview
govctl rfc list                           # List all RFCs
govctl adr list                           # List all ADRs

# RFC drafting
govctl rfc new "<title>"                  # Create RFC (auto-assigns ID)
govctl clause new <RFC-ID>:C-<NAME> "<title>" -s "<section>" -k <kind>
govctl clause edit <RFC-ID>:C-<NAME> text --stdin <<'EOF'
clause text here
EOF

# ADR drafting
govctl adr new "<title>"                  # Create ADR
govctl adr set <ADR-ID> context --stdin <<'EOF' ... EOF
govctl adr add <ADR-ID> alternatives "Option: Description"
govctl adr add <ADR-ID> alternatives "Other option: Description" --reject-reason "Why it was not chosen"
govctl adr tick <ADR-ID> alternatives --at 1 -s rejected
govctl adr tick <ADR-ID> alternatives --at 0 -s accepted
govctl adr set <ADR-ID> decision --stdin <<'EOF' ... EOF
govctl adr set <ADR-ID> consequences --stdin <<'EOF' ... EOF
govctl adr add <ADR-ID> refs RFC-0001

# Validation
govctl check                              # Validate all artifacts

---

CRITICAL RULES

1. Discussion-first — Understand the problem before proposing solutions
2. Research existing context — Check what RFCs/ADRs already exist and reference them
3. Draft only — Never finalize RFCs or accept ADRs in this workflow
4. No work items — This is spec phase; work items come later with /gov
5. Ask when unclear — If requirements are ambiguous, ask clarifying questions
6. Quality over speed — Produce complete, well-structured drafts
7. Reference format — Always use [[artifact-id]] syntax when referencing artifacts (e.g., [[RFC-0001]], [[RFC-0001:C-FOO]]) — in content fields AND code comments
8. No lifecycle verbs — accept, finalize, advance, and bump belong to /spec or /gov
9. No raw VCS here — If draft artifacts should be recorded, hand off to /commit
10. Keep artifact roles clean — RFCs describe externally relevant behavior and constraints, ADRs describe trade-offs and rationale, and work items do not belong in this workflow

---

PHASE 0: CONTEXT DISCOVERY

0.1 Survey Existing Governance

Before discussing, understand what already exists:

govctl status
govctl rfc list
govctl adr list

0.2 Identify Relevant Artifacts

Based on $ARGUMENTS, identify RFCs and ADRs that might be relevant:

• Related RFCs: Specifications that touch the same domain
• Related ADRs: Previous decisions that constrain options
• Superseded artifacts: Old decisions that may need updating

Read relevant artifacts to understand existing constraints and decisions.

0.3 Note Project Configuration

Read gov/config.toml to understand project-specific settings that may affect the design.

---

PHASE 1: CLASSIFICATION & DISCUSSION

1.1 Classify the Topic

Parse $ARGUMENTS and classify:

Use the authority test when drafting:

• If the statement answers "what must be true?" -> RFC
• If it answers "why this option?" -> ADR
• If it answers "what are we doing right now?" -> not this workflow; that belongs in a work item

1.2 Discussion Phase

If requirements are clear: Proceed to Phase 2.

If requirements are ambiguous: Ask clarifying questions before proceeding.

Questions to consider:

• What problem are we solving?
• Who are the users/consumers?
• What are the constraints (performance, compatibility, complexity)?
• What are the trade-offs we're willing to make?
• Are there existing patterns we should follow or deviate from?

Do not invent requirements. If something is unspecified, ask.

1.3 Design Exploration

For complex topics, explore the design space:

1. Identify options: What are the possible approaches?
2. Analyze trade-offs: What does each option make easier/harder?
3. Check constraints: What do existing RFCs/ADRs require or prohibit?
4. Recommend: Which option best fits the project's needs?

If the decision is high-risk (2+ competing options with non-obvious trade-offs, irreversible change, or cross-cutting impact), follow the decision-analysis skill for a structured premortem/backcast analysis. The analysis output maps directly to ADR fields — see the skill's "Output → ADR Mapping" section.

Document this exploration — for ADRs, it should first become alternatives and only later become the final decision.

---

PHASE 2: DRAFT ARTIFACTS

2.1 RFC Drafting (if needed)

For structure, templates, and quality guidelines, follow the rfc-writer skill.

govctl rfc new "<title>"
govctl clause new <RFC-ID>:C-<NAME> "<title>" -s "<section>" -k <kind>
govctl clause edit <RFC-ID>:C-<NAME> text --stdin <<'EOF'
clause text
EOF

2.2 ADR Drafting (if needed)

For structure, templates, and quality guidelines, follow the adr-writer skill.

govctl adr new "<title>"
govctl adr set <ADR-ID> context --stdin <<'EOF' ... EOF
govctl adr add <ADR-ID> alternatives "Option: Description"
govctl adr tick <ADR-ID> alternatives --at 1 -s rejected
govctl adr tick <ADR-ID> alternatives --at 0 -s accepted
govctl adr set <ADR-ID> decision --stdin <<'EOF' ... EOF
govctl adr set <ADR-ID> consequences --stdin <<'EOF' ... EOF
govctl adr add <ADR-ID> refs RFC-NNNN

In this sequence, alternative 0 is the chosen option and alternative 1 is explicitly rejected.

ADR drafting order:

1. Write context
2. Add and discuss alternatives
3. Mark rejected and accepted alternatives
4. Only then write decision
5. Finish with consequences

Historical backfills are the exception: if alternatives cannot be reconstructed, say so explicitly in context and write the best supported decision.

2.3 RFC Amendment (for changes to existing specs)

When existing RFC needs modification:

# Edit the clause content
govctl clause edit <RFC-ID>:C-<NAME> text --stdin <<'EOF'
Updated specification text.
EOF

# The RFC version may need bumping during /spec or /gov handoff
# Do NOT bump version in /discuss — handoff owns lifecycle operations

Note: Amendments to normative RFCs require careful consideration. Document the rationale for the change.

Clarification-only RFC updates that do not require implementation should hand off to /spec. Behavior-changing amendments, including feature deprecations or removals, should hand off to /gov.

2.4 Validate Drafts

After creating artifacts:

govctl check

Fix any validation errors before proceeding.

2.5 Review Drafts

Invoke the appropriate reviewer agent on each draft artifact:

• RFC drafted → invoke the rfc-reviewer agent
• ADR drafted → invoke the adr-reviewer agent

Address Critical issues before handoff.

2.6 Record (Optional)

If draft artifacts should be recorded, use /commit with docs(rfc): draft <RFC-ID> for <summary> or docs(adr): draft <ADR-ID> for <summary>.

---

PHASE 3: HANDOFF

3.1 Summary Report

Present the discussion results:

=== DISCUSSION COMPLETE ===

Topic: $ARGUMENTS

Artifacts created:
  - RFC-NNNN: <title> (draft, spec phase)
  - ADR-NNNN: <title> (proposed)

Key decisions:
  - <summary of main design choices>

Open questions:
  - <any unresolved issues>

Related artifacts referenced:
  - RFC-XXXX: <title>
  - ADR-YYYY: <title>

3.2 Next Steps

Prompt the user for next action:

Ready to proceed?

Options:
  1. /gov "<summary>" — Start governed implementation workflow
     - Creates work item
     - Finalizes RFC (with permission)
     - Implements, tests, completes

  2. /spec "<summary>" — Maintain governance artifacts without implementation
     - Accepts ADRs with permission
     - Clarifies or amends RFCs without code changes
     - Validates and renders governance output

  3. Continue discussing — Refine the drafts further
     - Ask follow-up questions
     - Add more clauses or detail

  4. Pause — Save drafts, return later
     - Drafts can be recorded with `/commit` and resumed later

If the only follow-up is standalone non-behavioral cleanup unrelated to the drafted RFC/ADR (for example, wording-only docs cleanup), `/quick` may be used separately. Do not use `/quick` to implement behavior from these drafts.

---

ERROR HANDLING

When to Stop and Ask

1. Conflicting requirements — existing RFCs/ADRs contradict each other
2. Scope unclear — cannot determine what's in/out of scope
3. Missing context — need information not available in codebase
4. Breaking change — proposal would break existing normative behavior

When to Proceed

1. Minor ambiguity — make reasonable assumption, document it
2. Style questions — follow existing patterns in the codebase
3. Optional details — defer to implementation phase

---

CONVENTIONS

Artifact References

Use [[artifact-id]] syntax for inline references in content fields:

# Good - expands to clickable link when rendered
context = "Per [[RFC-0001]], all RFCs must have a summary clause."

# Also good for clauses
decision = "Follow [[RFC-0001:C-SUMMARY]] structure."

# Bad - plain text, not linked
context = "Per RFC-0001, all RFCs must have a summary clause."

Also use in source code comments for implementation traceability:

// Implements [[RFC-0001:C-VALIDATION]]
fn validate() { ... }

// Per [[ADR-0005]], we chose X over Y

This enables govctl check to validate all references exist and are not deprecated.

For RFC 2119 keywords and clause conventions, see the rfc-writer skill. For ADR structure and field conventions, see the adr-writer skill.

---

DISCUSSION CHECKLIST

• Existing RFCs/ADRs surveyed
• Topic classified (RFC, ADR, both, or neither)
• Requirements clarified (asked questions if needed)
• Design options explored
• Draft artifact(s) created with complete structure
• Validation passed (govctl check)
• Summary presented
• Next steps offered

BEGIN DISCUSSION NOW.